The main parameters of the dosing metering pump are rated flow rate of 24-2000L/h and rated pressure of 1.0Mpa. The temperature of the conveying medium is -30-50 ℃ (100 ℃ for stainless steel). Medium viscosity: 0.3-800 mm2/s. Measurement reset accuracy+-1% determines flow rate, output pressure, pump type, and flow direction: Flow rate: Under a certain pressure, the size of the flow rate is proportional to the speed. Pressure: determined by the number of pump stages, typically with a working pressure range of 0.6MPa (6Kg/cm2) per stage. Flow direction: The material flow direction of the pump is determined by the direction of the motor, which can be easily adjusted and changed according to the needs of the inlet and outlet. Usually, the flange port near the drive end is used as the inlet, which can be adjusted at 90 ° C according to the needs; Rotate and install in the direction.