
MICROFLUIDIC PREPARATION EQUIPMENT
BRIEF INTRODUCTION
AITESEN Microfluidic Preparation System is positioned for the scientific research and application of micro & nano complex injections. Through patented microfluidic chips, highly integrated ans systematic hardware systems (such as delivery pump systems, PAT toolkits, etc.), and user-friendly software systems guided by process applications, we provides mature and diversified solutions for the scientific research and industrial application of different drug delivery carries such as Liposome, LNP, Microemulsion, Microcrystals, Microspheres, etc. Equipment and solutions based on AITESEN microfluidic technology have been used in the research and industrialization of multiple clinical and marketed drugs.
MPE-L2 Microfluidic Preparation Equipment is an experimental microfluidic device widely used in the research and development of nucleic acid drugs, vaccines, and other formulations for many customers. It plays an important role in basic research, early process validation, and technology development stages. It plays an important role in basic research, early process validation, and technology R&D stages. MPE-L2 is powered by injection pumps and only requires a small amount of samples for experimentation. The reinforced glass material injector and metal chip in the equipment are reusable components, not consumables, and there is no usage cost in the subsequent use of the equipment. The innovative design of MPE-L2 also supports multiple sample injections during the experiment to meet the preparation requirements for more sample volumes.
TECHNICAL PARAMETERS:
|
Model |
MPE-L2 |
|
Sample Volume Range |
1ml-200ml (suggested value) |
|
Maximum Pressure |
0.7MPa |
|
Flow Rate Range (per channel) |
0-62.5ml/min |
|
Flow Rate Ratio |
adjustable |
|
Flow Repeatability Error: |
≤1% |
|
Adapted Chip Material: |
Metal material (standard configuration, rusable); Other materials: PDMS、PMMA、PC、COC、COP etc. |
|
Channel Size |
20um-3mm |
|
Operation Mode |
PC |
|
Syringe Specifications: |
1ml、2.5ml、5ml、10ml、25ml |
|
Process Continuity |
Can share the same structure chip with pilot and GMP production equipment |
|
Technical Support |
Support customized chip with different materials or structures |
|
Selection Suggestion |
Suitable for early technical validation and prescription process research of micro and nano formulations |